Kaixo amigueros... Aqui os dejo INFORMACION sobre la aceleradora M-TECH para el Amiga 1200... Porque?. pues porque tras tres aņos con ella, e innumerables problemas de configuracion, he conseguido que me funcione PERFECTAMENTE, haciendo caso del texto que os dejo a continuacion, puesto que esta placa da muchos problemas cuando se amplia... (Por lo menos a mi y a tres personas mas asi ha sido)... Probarlo haber si teneis suerte, ok?!... y ya me contareis... yo ahora tengo 8 Mb de ram que me funcionan BIEN!!.. tras probrar 12 sims... (SI DOCE) de distinta marca, configuracion Ns, Edo no Edo, y con varios chips.. etc... NUNCA me funciono con 8Mb (me daba errores en la memoria segun los chequeadores de RAM)... pero cambiando estos "jumpers" como dice en el texto el problema se me ha SOLUCIONADO!!! :_) Ahora toy' contento.. ;-D MTEC 68030 BOARDS FOR A1200 - INFO =========================================================== -+- IN ENGLISH -+- This text file is for you people who bought an MTEC 68030 board for A1200. About ANYTHING printed on the board is wrong, I mean all the stuff related to the jumpers locations and positions. In this archive you will find all the necessary material to place more ram in it. Beware : this board is limited to 8Mb and the board is in no case PCMCIA friendly. Also another problem may occur, if you place 8Mb and/or 60ns memory you should experience weird crashings, for none obvious reasons. If it happens do the following changes, it should help you getting rid of those crashings. However do not ask me why, I don't even know... I found it on doing various test on jumpers positions. Originally, you have an RTC jumper (closed) and a 28Mhz (this one's open) RTC [··] <=== ORIGINAL 28Mhz ·· Simply change the jumper, open the RTC jumper and close the 28Mhz RTC ·· 28Mhz [··] Now you have it, a "perfectly" working MTEC board. -+- CONTACTING -+- Only via e-mail : Here is my main e-mail adress : hibisch@hotmail.com It's bye bye from HIBISCH. --------------------------------------------------------------- Nada mas... Un saludo para todos... Manu's/GOBLINS goblins@usa.net